16in x 32in Horizontal Galvanized Metal Pegboard Tool Board Panel - Metallic
16in x 32in Horizontal Galvanized Metal Pegboard Tool Board Panel - Metallic Description
(1) 16in Tall x 32in Wide Horizontal Galvanized Metal Pegboard Tool Board Panel
Mounting Hardware and Instructions Included. Mounting hardware consists of (6) #12 Screws & (6) Drywall Anchors
*For mounting into concrete, we would recommend using Blue TapCon screws or equivalent*
The Wall Control Pegboard 16in Tall x 32in Wide Horizontal Galvanized Metal Pegboard Tool Board Panel is one of our most popular, durable, versatile, and attractive pegboard panels. This Wall Control Pegboard Panel is constructed from 20 Gauge Steel and is over 10 times stronger than conventional pegboard.
The horizontal orientation of this pegboard panel allows for tool storage in tight places like above workbenches but under cabinets and in other tight areas where vertical space is limited.
This attractive pegboard works great in the garage, shop, kitchen, office, closet, or craft room. Thanks to the Wall Control pegboard modular design, you can expand your storage area as time and budget allow. These pegboard panels are great individually or used in conjunction with pre-packaged value kits if you just need one or two extra panels to complete an area.
The Galvanized Metal Pegboard features a long lasting, scratch resistant, and attractive metallic and shiny galvanized finish.
This Metal Pegboard Tool Board Panel will accept conventional 1/4in standard peg-board hooks as well as Wall Control's patented and secure slotted pegboard hooks and accessories.
Wall Control Pegboard Products are Made in the USA
Wall Control has designed a metal pegboard system that will last a lifetime. If you are tired of wrestling with old, ugly masonite or plastic pegboard then you have come to the right place. Wall Control's metal pegboard design and high-strength construction allow it to perform for years upon years as your wall storage center home base.
All Wall Control metal pegboard products are backed by a Limited Lifetime Warranty which protects against product failure and manufacturing defects, if installed and used correctly. We have engineered our metal pegboard products to last a lifetime and have backed that claim up by offering this warranty.
If your Wall Control metal pegboard were to ever fail, just send it back and weäó»ll replace it!
*For exclusions to this Limited Lifetime Warranty please visit our Lifetime Warranty page
Showing reviews 1-10 of 13 | Next
Posted by Tom Mackin on 4th May 2017
I like the slotted peg board idea a lot - mix and match colors - look sharp be sharp. Hangers look and work better than peg hooks.
Great product: Use rare earth magnets for peg retention
Posted by Jim Coplan on 22nd Feb 2017
I have purchased several of these boards. The one complaint is that the hooks sometimes come out. I found a solution for that: Rare earth magnets. I use oblong magnets snugged flat up against the Wall Control hooks, and small disc magnets underneath and between the 2 retaining pins of the old "legacy" wallboard hooks. I've put up a review on Amazon with photos.
Great and study organizer
Posted by David W on 2nd Jul 2016
I have tried everything to keep my garage organized. A rolling tool chest helped a lot. This product is superior to all. Tools and other items are now visible and within easy reach.
The slotted metal peg board accepts wall control holders as well as regular 1/4 inch pegs. I prefer the former except for tools that hang by holes (paint brushes eg.) These fit better on long pegs. Wall control should offer a similar shape. I really like the paper towel shelf. The assorted peg kits (small and large) contained what I needed and had plenty of versatility.
My only issue is that the boards are made for sitting side by side and attaching to studs. My configuration was different from this. It actually gives me more flexibility since the tools can extend over the sides of each board . There is no provision for screwing into a stud except at 16 inch intervals. There could be more flexibility. I used molly bolts into dry wall. Plenty strong but hard to install due to the offset of the board holes. Other than this, I highly recommend this system.
Posted by 378 on 17th May 2016
Easy to install- just 6 screws. Come with the all the hardware to install even into drywall. Love the peg accessories wall control has.
2 of 6 slightly dented
Posted by Don on 8th Feb 2016
Like the board, although regret going galvanized. With LED lighting it reflects quite a bit. The imperfections from shipping looked small so put it up, unfortunately the lighting accentuates the shipping bend.
Love this Pegboard
Posted by Unknown on 30th Jan 2016
I LOVE this metal pegboard. It's absolutely amazing!!! My contractor said it was a breeze to hang and we both love the quality and that it's made in the USA.
Posted by Gordon on 9th Nov 2015
These panels are strong and thick steel unlike some other steel panels offered by the big box home stores. Definitely a lifetime purchase. No more replacing pegboard every few years. Pay attention to the warning about edges.
A quality product
Posted by Mike Step on 5th Nov 2015
This pegboard is exactly as described ; strong consistent in size and easy to install.
Posted by Joe on 16th Oct 2015
The panels are good quality pieces. Spend the little extra for the powder coated ones though. I got the galvanized ones and got a pretty good cut on my hand pulling it out of the box.
Posted by Unknown on 21st May 2015
like the metal pegboards but not impressed with the holders
Showing reviews 1-10 of 13 | Next
Customers also viewed