- 2 ft Power Strip - AO-OUTLET-2F
- 3 ft Power Strip - AO-OUTLET-3F **Temporarily Out of Stock - In-Stock Date Unknown**
- 4 ft Power Strip - AO-OUTLET-4F **Temporarily Out of Stock - In-Stock Date Unknown**
Description: Have plenty of room to plug in power tools, drills, chargers, lights, electronics, and anything else you've got with a spacious and easy access power strip charging station outlet rail for your Wall Control Pegboard! Perfect for the workshop, garage, warehouse, office and home. The wide spacing of the outlet plug receptacles keeps your wall organization from becoming cluttered and cramped with cords that won't plug in due to overcrowding. The Wall Control Peg Board Charging Station Power Strip puts electrical power right where you need it for an efficient, attractive, and heavy duty peg-board charging station for power tool batteries, lights, phones, and much more. The included accessory hangers and wall brackets allow for a solid and secure attachment to Wall Control Pegboard making installation fast, simple, and secure right out of the box. This industrial grade heavy-duty power strip mounts to Wall Control Pegboards using only solid steel brackets and clips for a quality and secure attachment you can trust.
The power strip features a sturdy, heavy-duty industrial grade metal housing, and a master On/Off Switch with 15Amp Resettable Circuit Breaker. Surge Protected up to 400 Joules. ETL Approved and Listed (Conforms to UL 1363, UL 1449 and CAN/CSA C22.2 No. 21). Electrical Ratings: 125V/15Amp/1875W
Please Note - Safety First: When handling any electrical appliance or device it is important to ensure proper grounding. These Power Strips have a third prong cord plug which is intended to fit the round grounding slot on most modern outlet receptacles. The presence of this third prong indicates that the appliance or device has a grounding system, and it is essential that these be plugged into grounded outlets for maximum safety. If you have any questions regarding proper grounding with your home's or business's wiring and outlet system, we strongly recommend consulting with a licensed electrician prior to use.
Choose the size to fit your needs:
- 2 Foot Power Strip, 6 Outlets, 3 Foot Long Cord.
- 3 Foot Power Strip, 9 Outlets, 3 Foot Long Cord.
- 4 Foot Power Strip, 12 Outlets, 6 Foot Long Cord.
The outlet strip comes with 2 spring steel mounting clips that snap onto an 8 inch Accessory Hanger (10-AH-008) placed at each end of the strip.
View installation instructions below or our How-To guide here for further installation instructions.
- (1) Power strip (choose 2ft, 3ft, or 4ft long)
- (2) Fastening Easy Installation Clips
- (2) 8in Black Accessory Hangers (10-AH-008)
Have your own power strip laying around already?
Click the link below to view our "$5 Fix for Outlet Strips" for another easy power strip solution:
HOW TO MOUNT AN OUTLET RAIL POWER STRIP TO PEGBOARD
Overview of the items used for the power strip charging station installation:
Attach the Power Strip Outlet's brackets to the Accessory Hanger, make sure it is put together the same way as the image below.
Attach the Accessory Hanger with Power Strip Outlet bracket attached to desired location on Wall Control Slotted Pegboard.
Make sure the power strip outlet is completely attached to the brackets.
Done! You are now ready to use your Wall Control Pegboard Power Strip Charging Station Outlet Rail!
Outlet Color: White
Outlet Orientation: Horizontal
Plug / Receptacle Type: NEMA 5-15P / 5-15R
Outlet Spacing: 3″ (78mm) (center to center)
Power Cord: 3′ (0.91M) 14/3 AWG, SJT Heavy Duty
Voltage Input/Output: 110-125V 60Hz
Current Input: 15A
Yes (lighted) 1875VA (Recommended Max Load 1440W)
On/Off Switch: Yes (lighted)
Circuit Breaker: Resettable Circuit Breaker built in Switch
Surge Protection: Up to 400 Joules
Lines Protected: (L-N) (L-G) (N-G)
Response Time: Less than 5 nanosecond
Noise Filter: EMI/RFI
Mounting on Back: Yes
Mounting Tabs: On both ends (5/8″)
Mounting Clips: 3/4″ (19mm) Spring steel clips included
Please Note: Unlike All Wall Control Metal Pegboard Products that are made in our own manufacturing facility in Atlanta, Georgia, these Magnetic LED Light Bars are Made In China. All Wall Control Metal Pegboards, Hooks, and Shelves are Made in the USA but "Add-Ons" may be manufactured elsewhere although sourced from US Based Companies whenever possible. We try to source 100% Made in USA whenever possible but from time to time sourcing "Add-Ons" such as these Magnetic LED Shop Lights and Pegboard Garage Lights, proves exceedingly difficult based on the type of materials required to manufacture.