Frequently Asked Questions

do i need special tools to install wall control pegboard?

The only tools you'll need to install Wall Control metal pegboards are a drill, a level, and maybe a screwdriver and hammer for tapping in drywall anchors. No framework is required so very little "DIY" is necessary. If you've ever hung a picture on a wall, you can hang Wall Control pegboard too, it is just that easy. Just attach the pegboard to the wall and you're all set. The patented 3/4-inch formed mounting flange spaces the Wall Control Pegboard from the wall. The mounting holes are on standard 16-inch stud center spacing alignment, so you simply mount the panel directly into the studs with the mounting screws provided. Align the edge of the panel with the center-line of the stud and you'll be all set and can share studs all the way down the wall if the studs are 16-inch on-center. If they are not, no problem, just use the included drywall anchors. Wall Control Pegboard will mount to any flat surface, but if attachment is not directly into wall studs or secure drywall, we recommended that you consult with your local hardware representative for proper fastener selection as your application might call for hardware that is not included with the pegboard. For more information and some helpful how-to videos, please refer to our Installation Page.

can i use my pegboard hangers on wall control pegboard?

Yes. Most of our panels are offered in a "combo" style which will accommodate standard 1/4-inch diameter traditional pegboard style hooks as well as our patented slotted pegboard "double offset" style hooks and brackets. Unlike traditional pegboard the openings in our steel panels will not fray or elongate over time.

Can I Use Wall Control Where It Might Get Wet?

The Wall Control Pegboard features a baked-on powder coat finish that resists rust when exposed to moisture. Unlike traditional pegboard, it will not "swell" or "warp" due to humidity or moisture so it is ideal for garages, workshops, laundry rooms, barns and boat houses.

can wall control pegboards be used for more than just hand tools in the garage?

Absolutely! Wall Control Pegboard was designed to be both versatile and attractive. It is suitable for use anywhere that wall storage, display or organization is required; laundry rooms, play rooms, kitchens, sewing rooms, hobby rooms, attics, closets, offices, retail stores and warehouses. Please refer to our social media accounts to see what creative ideas people have come up with to use their Wall Control for and hopefully come up with some yourself!

The Mounting Hardware Included Doesn't Work For My Application, What Do I Do?

We apologize the included hardware will not work with your installation. Feel free to use any mounting hardware you need to mount into your application safely. The screws and anchors are only provided as a convenience if they happen to work (most pegboard companies provide no mounting hardware for this very reason, as it is tough to guess what substrate each and every customer would be going into (straight into studs, drywall of varying thicknesses, cement, concrete block basement walls, plaster, steel studs, etc.). If you cannot use them, feel free to discard of them or save them and perhaps use them on a future project where they could be helpful.

How Much Weight Can My Pegboard Support?

Specific weight capacities depend upon quality of installation, substrate installed into, bracket or hook selection, weight distribution, actual load centers, and a whole host of other variables which make advertising specific and idealistic laboratory load ratings potentially misleading (be cautious of any brand that does this because this sort of advertising can be dangerous). That being said, our panels and brackets can hold a lot of weight when properly installed and used correctly. We offer panels, brackets, and shelves rigid and strong enough to support most heavy common storage items such as bicycles, ladders, sledge hammers and ironing boards just to name a few common applications. If you have a specific application that concerns you, contact us at or on our Contact Us page and we will be glad to assist you.

why is wall control pegboard superior to traditional pegboard?

Our panel is made from 20 gauge steel. It has a scratch resistant baked-on powder coat finish. Unlike traditional pegboard, Wall Control Pegboard is moisture resistant and will not swell or warp and the openings in the face of the panel will not fray or enlarge from repeated use.
A wide assortment of hooks, brackets, shelves and bins are available for this system. All of the hooks, brackets and shelves are steel, powder coated components. These components all move easily from slot to slot allowing your system to change as your storage needs change. With our "Combo" panels standard traditional pegboard style hooks may be used along with our patented Wall Control "double offset" style accessories. 
The slot face design and stabilizing tabs on larger brackets secure your stored items better than traditional "round hole" design hooks and brackets. In addition, the "double offset" design on all our components dramatically reduces the possibility of unintentional hook disengagement when the stored item is removed. Don't you just hate when the hook comes out with the tool?
Attractive Appearance. 
Wall Control Pegboards' powder coated or galvanized finishes are not just durable, but they are also highly attractive. Wall Control peg boards are available in (10) different color choices, Wall Control slotted pegboard accessories are available in (4) different color choices. Create a custom looking workspace by mixing and matching panel and accessory colors. Wall Control panels and attachments easily wipe clean with a damp rag so they keep their "new" appearance for years.
Ease of Installation.
The 3/4-inch flange on the Wall Control Pegboard eliminates the need for any supporting framework and the mounting hole positions align with standard 16-inch stud centers. The modular design of the standard 16-inch x 32-inch panels make it convenient to handle. So in just a matter of minutes your new Wall Control Pegboard is installed and ready for use.

how fast will I get my Pegboard order?

Orders from typically ship out within 1-3 business days from our Atlanta Georgia USA Fulfillment Center, at that time you will receive an automated tracking notification email from with your carrier Tracking Number. You can then track your order’s transit with greater detail and see an estimated delivery date. Please be sure to 'safelist' with your email provider as these automated emails often get caught in Spam Folders.

how are wall control pegboards and accessories shipped?

If your order is over 1 LB, it will likely ship via UPS or FedEx Ground. If your order is under 1 LB, it will likely ship via USPS. Currently, orders over $50 qualify for our FREE Shipping promotion. As a manufacturer, Wall Control only offers Ground and Standard shipment speeds. If you are in urgent need of Wall Control products, we recommend purchasing through a retailer who can often offer expedited shipping at a reasonable cost.

What Payment types Are Accepted?

All major Credit Cards as well as PayPal and Amazon Pay are accepted. We do not accept Check or Cash for direct purchases and do not extend Net 30 Terms outside of our wholesale distribution.


How to attach and remove wall control pegboard accessories

Wall Control's slotted accessories will only work on Wall Control's Metal Pegboard. Our Slotted Tool Board hooks and attachments offer a unique “double offset” design. This prevents the attachments from unintentionally falling out of the panel, yet still allows for easy movement from slot to slot. The animations below illustrate how to properly attach and detach Wall Control's slotted accessories.

Click Here if you cannot see the single slot attachemt process or Click Here if you cannot see the double slot attachment process.

How to adjust the stabilizing tabs on wall control peg board hooks

Wall Control's Metal Slotted Peg Board Hooks may be slightly loose upon arrival due to open stabilizing tab tolerances designed to accommodate all panel and hook finish thickness combinations. Simply put, a galvanized panel with behave differently compared to a white panel, since there is no paint on the galvanized pegboard. In the event one of your Accessories or Hooks is loose, please follow the below instructions to safely adjust your Stabilizing Tabs to your preference given your panel and hook finish thicknesses. Adjustment of your stabilizing tabs is not a necessity, it is purely based upon your preference.

Firearm storage guide

We have found that most customers utilize our U-Hooks and Shelves for firearm storage. That being said, we have all sorts of solutions out there because there is definitely more than one way to accomplish any task with our system, as gun collections vary from person to person and manufacturer to manufacturer.

We have listed a few of our products that are among the more popular accessories used for gun storage:

rubber coating peg board hooks

Wall Control Hooks & Accessories are powder coated and already offer a durable and attractive finish, but if you want to prevent metal contact with what you're storing, here are some DIY solutions for rubber coating Wall Control metal pegboard hooks and pegs is easy to do.

Using these rubber sleeves, we can achieve an easy way to prevent potential scuffs. They can be cut-to-fit and are reasonably flexible. Visit our Add-Ons page to purchase these rubber liners for your Wall Control Accessories.

Rubber Lined Accessories

shadow mark tape guide

Customizable Tool Silhouette Shadow Board Tape helps mark where each tool belongs on your pegboard so when things get a little messy you can clean up quickly and easily. The roll of tape is like a big sticker. Simply trace out your tool on the back of the roll and cut the shape out. Then peel off the backing and stick the shape to your panel in the location you would like the item stored.

round Peg hole hook guide

Wall Control Metal Pegboard Panels are designed to universially work with 1/4" peg hooks. However, not all peg hooks are created equal. 1/8" peg hooks do not work well with Wall Control Metal Pegboard. After experimenting with different brands of peg hooks, we have found that 1/4" peg hooks from the following brands are good to use with Wall Control Metal Pegboard:


In the process we also found that 1/4" peg hooks from the following brands are NOT good to use with Wall Control Metal Pegboard:


Please feel free to contact us if you have found other brands that either work or do not work with our pegboard.

Mounting screw Hole Plugs

If you are looking to cover the mounting holes of your Wall Control Metal Pegboard, visit our Add-Ons page to find the 1/2" hole plugs that work well with Wall Control Metal Pegboard.